1/24 Scale Full Detail Kit AM02-0075 Honda Fit (GK5)-Spoon - Alpha (1/24)

Thursday, 06 November 2025
0
1186
0

1/24 Scale Full Detail Kit AM02-0075 Honda Fit (GK5)-Spoon - Alpha (1/24)

The third-generation Fit retains the overall design concept of previousgenerations, notably the centre-located fuel tank and multi-confiqurationinterior concept, marketed as "Magic Seat". The model also debuted Honda'supdated desian language dubbed "Exciting H Design"Honda's all-new Global Small Car Platform employs ultra-high strength 780MPa yield steel for 27 percent of the bodywork and has a shorter overalllength by 4 cm (1.6 in), a 3 cm (1.2 in) longer wheelbase, increased rearlegroom by 12.2 cm (4.8 in) and passenger volume increased by 136 L (4.8 cuft)compared to the previous generation.Body panels are both welded and bolted to the frame in a hybrid monocoqueand spaceframe fusion-and rear torsion beam suspension is more compact,no longer using an anti-sway bar to maximize interior and boot space.Thesecond-generation HR-V shares its platform with the third-generation Fit.nwith enhanced gear ratios.

After opening the product package, takeout all the parts bags and the car body,because the product will be damaged in thetransportation process through the logisticscompany, so first of all, check whether theparts are damaged, the more easilydamaged are the A-pillar of the car shell,brake calipers, rims and other small parts.After confirming that the parts are notdamaged, please check whether the etchingsheet is bent and damaged and whether thewater paste is stained. After confirmingthat all the standard items are free ofproblems, you can start the preparationwork.

AlphaModel's products are precise in moldopening, especially in the production technology ofthe car shell, which is very mature. The shape ofthe car shell is precise, the surface is smoothwithout burrs and shrinking, the engraving line isdeep, and the edge is sharp. These characteristicsgreatly reduce the difficulty of production, which isvery suitable for novices.Each car has its own unique color matching andflower pulling, before production, you can refer tothe real car photos, mark the color of each part onthe product manual, to facilitate the use of latercoloring;in the production process of this product,we need to prepare some necessary tools inadvance, such as: marking pen, paper sandpapersponge sandpaper,instant glue, tweezers,scribing knife, pen knife, etching sheet bendingpliers, etc. There are handy tools to make it feegood, which can help players make high-qualitystatic models more easily.Use detergent or other greasy detergent suitablefor resin materials to clean all parts, because thereis a layer of grease release agent on the surfaceof the workpiece, if it is not cleaned and sprayeddirectly, there will be problems such as fish eyespaint fading due to lack of adhesion, etc.Aftercleaning, it can be dried.

First of all, observe the variousparts of the car shell. Generally,there will be some unevenness atthe bottom of the side skirt. First,use sandpaper to polish and level it.After confirming that there is no lackof meat and other problems, use a0.15 caliber scribing knife to deepenthe scribing line. Although thescribing line of the car shell itself isclearer,we need to deepen itmanually again. This is to make itmore three-dimensional after thecompletion of the production. Youcan also consider the impermeableline and use the natural shadow toshow the texture of the reticleposition.During scribing, the force shall befrom light to heavy. First, gentlymake a few cuts along the scribeline, and then slowly apply pressureAt the position of the arc, use theelbow scribing knife to deepen thescribe line. lf there is no scribingknife, do not carve out of theboundary when using the straightscribing knife to deepen, so as toavoid more trouble.Pay attention tothe angle of the knife head, and donot carve the scribe line with radianinto a straight line.

Body yellow l chose Tamiya TS47 glossy yellow. Before spraying the main color, we needto spray white water to fill the soil and unify the background color, and then spray themain color. Whether spraying the soil or the main color, we must carefully observewhether the spraying is uniform. These two colors belong to the low coverage color, anduniform spraying is very important.

When the body paint is dry, you can paste the decals on the body. First, cut off the decathat needs to be pasted. Then soak it in water and wait for about 20 seconds. Use tweezersto gently clamp it and transfer it to the body, Adjust the position. Then use it to gentlysqueeze out the excess water. Finally, use a hot air gun to blow soft and compact it with acotton swab