Welcome to the Alpha model
We are the premium manufacturer of high-quality automotive scale model kits.
build car model
1/24 Scale Full Detail Kit AM02-0084 Ferrari SF90 XX Stradale - Alpha (1/24)
Ferrari SF90 XX Stradale 1/24 Scale Model Build Guide (AlphaModel)
I. Unpacking and inspection
Alphamodel features a corresponding nameplate for each model in the photo-etched parts of every product set. Modelers can paint this nameplate and display it alongside the finished model in a display case, which adds a premium feel.




II. Screw lines and polishing the car body
First, inspect the various areas of the car body. Typically, slight unevenness may be present at the bottom of the side skirts. Begin by using sandpaper to smooth and level these surfaces. After confirming there are no issues like missing material, proceed to deepen the panel lines with a **0.15mm panel line scriber**. Although the body's panel lines are generally clear, manually deepening them enhances the three-dimensional effect of the finished model. This step may also allow you to skip panel lining washes and rely on natural shadows to highlight the texture of the recessed lines.




III. Printed Parts
After applying the water decals, you can proceed to spray the urethane clear coat. For this, I have chosen Glasurit (BASF) Clearcoat 666. Apply three wet coats before stopping.
This particular livery is unique: on the actual car, all areas except the carbon fiber parts are finished in semi-gloss black, while the carbon fiber surfaces are mirror-gloss. However, due to perspective and lighting effects at the model's reduced scale, replicating mirror-gloss finishes on all carbon fiber parts may reduce visual appeal. Therefore, for the front splitter, side skirts, and diffuser, I opted for the same semi-gloss finish as the main body color. In contrast, the roof, roof vents, side mirrors, rear engine cover, rear section, spoiler, as well as parts R16, R33, R34, R35, R36, R47, R78, and R101are finished with a mirror-gloss effect.



IV. Decals
Parts that require carbon fiber water decals should first be painted black. Then, apply the carbon fiber water decals. Before application, carefully read the instructions and select the appropriate decal based on the part number.After applying the decal, use a pointed cotton swab to press it firmly into any recessed areas, and a round-tipped cotton swab to secure the edges.
When using a heat gun on the decals, avoid prolonged exposure to prevent softening or warping of the resin parts. You can check the temperature by lightly touching the area with your finger—stop heating when it feels hot to the touch.
AlphaModel's water decals offer excellent flexibility and adhesive strength, making them relatively easy to work with. With a bit of patience, each part can be completed perfectly. After all water decals are applied, spray a layer of semi-gloss clear coat (**Mr. Hobby C-181**) over the surface to unify the gloss finish.




V. PE




0users like this.
1/24 scale model car kit Related Products
Your cart is currently empty.
USD